12
300/ 400TS and 300/ 400S
M A I N TEN A N C E
3) Remove the C-ring and detach the Solenoid Valve (SOL1).
When reinstalling, make sure that the C-ring seats in the Solenoid Valve groove.
2
1
3. 23 M ai n O N / O FF Sw i t ch ( S1)
1) Remove the Side Panel. [Reference page : 11-1]
2) Remove the six screws and six terminals.
1
2
2
1
3) Remove the two screws and detach the Main ON/OFF Switch (S1). Remove the three posts.
12 – 24