Table of Contents
Advertisement
2
INTRODUCTION
1
How To Use This Manual
This Service Manual applies to just specification or
part numbers listed on page i.
To ensure safe operation, read the entire manual,
including the chapter on safety instructions and
warnings.
Throughout this manual, the words WARNING,
CAUTION, and NOTE may appear. Pay particular
attention to the information provided under these
headings. These special annotations are easily
recognized as follows:
WARNING
A WARNING gives information regarding possible
personal injury.
CAUTION
A CAUTION refers to possible equipment damage.
NOTE
A NOTE offers helpful information concerning cer-
tain operating procedures.
Additional copies of this manual may be purchased
by contacting Thermal Arc at the address and
phone number in your area listed in the inside back
cover of this manual. Include the Service Manual
number and equipment identification numbers.
Electronic copies of this manual can also be down-
loaded at no charge in Acrobat PDF format by
going to the Thermal Arc web site listed below and
clicking on the Literature Library link:
http://www.thermalarc.com
2
Equipment Identification
The unit's identification number (specification or
part number), model, and serial number usually
appear on a nameplate attached to the control
panel. In some cases, the nameplate may be
attached to the rear panel. Equipment which does
not have a control panel such as gun and cable
assemblies is identified only by the specification or
part number printed on the shipping container.
Record these numbers on the bottom of page i for
future reference.
2 – 1
Hide quick links:
Advertisement
Table of Contents
