HIKVISION UD.6L0201D1633A01 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. IP Camera
  5. UD.6L0201D1633A01
  6. User manual
HIKVISION UD.6L0201D1633A01 User Manual

HIKVISION UD.6L0201D1633A01 User Manual

Hd wdr box camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Camera
HD WDR Box Camera
User Manual
UD.6L0201D1633A01
0

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION UD.6L0201D1633A01

Summary of Contents for HIKVISION UD.6L0201D1633A01

  • Page 1 Camera HD WDR Box Camera User Manual UD.6L0201D1633A01...
  • Page 2 HD WDR Box Camera·User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual.
  • Page 3 HD WDR Box Camera·User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 HD WDR Box Camera·User Manual Municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 5: Safety Instruction

    HD WDR Box Camera·User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 6 HD WDR Box Camera·User Manual the IEC60950-1 standard. Please refer to technical specifications for detailed information.  Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.  Please make sure that the plug is firmly connected to the power socket.
  • Page 7 HD WDR Box Camera·User Manual  Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time.  The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam.

  • Page 8: Table Of Contents

    HD WDR Box Camera·User Manual Table of Contents 1 Introduction ................. 8 1.1 Product Features ............. 8 1.2 Overview ................. 9 Overview of the Box Camera ......... 9 2 Installation ................. 12 Wall Mounting .............. 12 Ceiling Mounting ............18 3 Menu Description ...............

  • Page 9: Introduction

    HD WDR Box Camera·User Manual 1 Introduction 1.1 Product Features This camera adopts high performance sensor and advanced print circuit board design technology. It possesses of high resolution, low distortion, and low noise features, etc. It is extremely suitable for surveillance system and image process system.

  • Page 10: Overview

    HD WDR Box Camera·User Manual 1.2 Overview Overview of the Box Camera Figure 1-1 Overview of the Box Camera Table 1-1 Description of the Box Camera Description Lock screw Auto-Iris Drive Interface The Auto Iris Interface The auto iris interface is composed of four square pins as shown in Figure 1-2.
  • Page 11 HD WDR Box Camera·User Manual Damp- Damp+ Driver- Driver+ Figure 1-2 Pins of the Auto Iris Interface Rear Panel The rear panel of the box camera is shown as follows: Figure 1-3 Panel Description of the Box Camera...
  • Page 12 HD WDR Box Camera·User Manual Table 1-2 The Rear Panel Description Description Description Lens Power Indicator Grounding Screw Analog Video Power Interface Output Interface TVI Video Output Alarm OUT, IN, GND Interface Interface Joystick...

  • Page 13: Installation

    HD WDR Box Camera·User Manual 2 Installation Before you start:  Please make sure that the device in the package is in good condition and all the assembly parts are included.  Make sure that all the related equipment is power-off during the installation.
  • Page 14 HD WDR Box Camera·User Manual 2. Plug the wire of auto iris lens to the auto iris interface of the camera.  Please prevent dust from entering between the lens mount and the lens.  The weight of the lens must be less than 1kg. It’s better to install a lens with CS type interface.
  • Page 15 HD WDR Box Camera·User Manual Figure 2-2 Fix the Back-plane in the housing 4. Fix the back-plane with the camera in the camera housing. As shown in Figure 2-3. Figure 2-3 Fix the Camera in the Housing 5. Adjust the focal length of the lens and complete the focus adjustment.
  • Page 16 HD WDR Box Camera·User Manual  Move the zoom lever between T (Telephoto) and W (Wide angle) to obtain the appropriate angle of view.  Move the focus lever between F (Far) and N (Near) to obtain the optimum focus. In practical applications, you need to choose the corresponding lens according to the size of the sensor.
  • Page 17 HD WDR Box Camera·User Manual Figure 2-5 Install the Bracket The wall mount (not provided) should be longer than 1/2 of the camera length. 9. Attach the camera with the housing to the wall mount and tighten the fix screw to fix the camera. As shown in Figure 2-6. Figure 2-6 Fix the Camera Housing...
  • Page 18 HD WDR Box Camera·User Manual 10. Loosen the panning lock screw to adjust the panning angle of the camera. As shown in Figure 2-7. Figure 2-7 Adjust the Panning Angle 11. Loosen the tilting lock screw. You can adjust the tilting angle of the camera.

  • Page 19: Ceiling Mounting

    HD WDR Box Camera·User Manual Ceiling Mounting Steps: 1. Drill the screw holes on the wall according to the drill template. As shown in Figure 2-9. Figure 2-9 Mounting Template 2. Attach the ceiling mount to the wall and tighten the screws to fix it.
  • Page 20 HD WDR Box Camera·User Manual Figure 2-11 Fix the Camera Housing 4. Loosen the adjustable nut to adjust the panning angle and tilt angle of the camera. Adjustment Nut Figure 2-12 Angle Adjustment...

  • Page 21: Menu Description

    HD WDR Box Camera·User Manual 3 Menu Description Menu VIDEO. SETUP LAUGUAGE ADJUST SPECIAL RESET SCENE LENS EXPOSURE BACKLIGHT DAY&NIGHT EXIT MANUAL SHUTTER COLOR 2D NR INDOOR SHARPNESS TITLE HSBLC AWC-SET 3D NR D-EFFECT MONITOR OUTDOOR INDOOR1 SENS-UP MANUAL MOTION LOW- PRIVACY BRIGHTNESS...

  • Page 22: Video.out

    HD WDR Box Camera·User Manual 3.1 VIDEO.OUT Phase Alternating Lines (PAL) is a color encoding system for analog television used in broadcast television systems in most countries broadcasting at 576i. National Television System Committee (NTSC) is the analog television system that is used in most of North America, parts of South America Myanmar, South Korea, etc.

  • Page 23: Lens

    HD WDR Box Camera·User Manual 3.3.3 LENS The lens of the camera can be selected as manual or DC. . 3.3.4 EXPOSURE EXPOSURE 1. SHUTTER AUTO 2. AGC 3. SENS-UP 4. BRIGHTNESS ---|------ 40 5. D-WDR 6. DEFOG 7. RETURN Figure 3-2 Exposure Exposure describes the brightness-related parameters.
  • Page 24 HD WDR Box Camera·User Manual If you select shutter as AUTO or 1/30, the SENS-UP is adjustable (OFF/AUTO), and the SENS-UP is disabled if any other shutter speed is selected. It’s a form of amplification where the camera will automatically boost the image received in much lower light conditions than standard in order to optimize the clarity of image in poor light scene.
  • Page 25 HD WDR Box Camera·User Manual AUTO: The SENS-UP function will atomically adjust itself to x2, x4, x6, x8, x10, x15, x20, x25, and x30 according to the different light conditions. Brightness Brightness refers to the brightness of the image. You can set the brightness value from 1 to 100 to darken or brighten the image.
  • Page 26 HD WDR Box Camera·User Manual DEFOG  1. POS/SIZE 2. GRADATION  3. DEFAULT 4. RETURN Figure 3-3 Defog Steps: 1. Move the cursor to POS/SIZE, and press OK to enter the position and size configuration interface. 2. Move the joystick up/down/right/left to define the position of the defog area.

  • Page 27: Backlight

    HD WDR Box Camera·User Manual Enabling the defog function will increase the contrast of the image. It is recommended that the defog function is set to OFF during the normal environment. 3.3.5 Backlight Backlight is applicable for the backlight or the high luminance environment;...
  • Page 28 HD WDR Box Camera·User Manual The gain of BLC can be set to High, Middle, and Low, the higher the gain is, and the clearer the image is. Follow the steps below to set a BLC area. Steps: 1. Move the cursor AREA, and press OK to enter the area edit interface.
  • Page 29 HD WDR Box Camera·User Manual HSBLC HSBLC 1. SELECT AREA 1 ON  2. DISPLAY 3. LEVEL ---|------ 40 4. MODE ALL DAY 5. BLACK MASK  6. DEFAULT 7. RETURN Figure 3-6 HSBLC HSBLC masks strong light sources that usually flare across a scene. This makes it possible to see the detail of the image that would normally be hidden.
  • Page 30 HD WDR Box Camera·User Manual 8. Press OK to confirm the configuration and select RET to return to the HSBLC menu, or select AGAIN to re-define the HSBLC area.  LEVEL It is adjustable from 0 to 100. If the brightness is higher than the level you set, the HSBLC will take effect.

  • Page 31: White Balance (Wb)

    HD WDR Box Camera·User Manual 3.3.6 White Balance (WB) White balance is the white rendition function of the camera to adjust the color temperature according to the environment. It can remove the unrealistic color casts in the image. MANUAL, ATW (Auto-tracking White Balance), AWC→SET are selectable.

  • Page 32: Day & Night

    HD WDR Box Camera·User Manual The white balance is not adjustable if B/W mode is selected. 3.3.7 Day & Night Color, B/W, EXT and AUTO are selectable for DAY and NIGHT switches.  COLOR The image is colored in day mode all the time. ...
  • Page 33 HD WDR Box Camera·User Manual N->D (AGC): The threshold value is configurable from 0 to 100 for determining whether to switch the image from B/W to color in current light condition. AUTO 1. DELAY -------|--8 0 2. D->N(AGC) -------|--8 0 3.
  • Page 34 HD WDR Box Camera·User Manual  3D NR Compared to traditional general 2D NR technology, 3D NR processes the noise reduction between two frames instead of in one frame. It can decrease the noise effect, especially when capturing moving images in low light conditions and delivering more accurate and sharp image quality.

  • Page 35: Special

    HD WDR Box Camera·User Manual The 3D NR level ranges from 0 to 100. You can set a threshold to enable AGC from Start. AGC, and set a threshold to disable AGC from End.AGC. 3.3.9 SPECIAL In the SPECIAL sub-menu, you can set the camera name, the digital effect of the image, the motion detection, privacy task, language, dead pixel correction, and check the version of the camera.
  • Page 36 HD WDR Box Camera·User Manual CAM TITLE 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ▶ → ←↑↓( ) ¯...
  • Page 37 HD WDR Box Camera·User Manual 5. (Optional) Move the cursor to CLR to clear all the selected characters. 6. Move the cursor to END and press OK to save the settings and return to the previous menu. D-effect D-EFFECT 1. FREEZE 2.
  • Page 38 HD WDR Box Camera·User Manual MIRROR: The image flips 180 degree horizontally. V-FLIP: The image flips 180 degree vertically. ROTATE: The image flips 180 degrees both horizontally and vertically.  D-ZOOM You can set the D-ZOOM as ON to zoom in the image. When digital zoom is processed, the image will be enlarged without gaining the actual pixel.
  • Page 39 HD WDR Box Camera·User Manual SMART D-ZOOM 1. SELECT AREA1 2. DISPLAY 3. SENSITIVITY ---|----31 4. D-ZOOM x 2.0 5.TIME --|-------3 6.DEFAULT 7.RETURN Figure 3-16 Smart D-Zoom D-Zoom and Smart D-Zoom cannot take effect simultaneously. 2 areas are selectable. Move the joystick up/down to select the area. Set the display ON/OFF to display/not display the smart D-Zoom area.
  • Page 40 HD WDR Box Camera·User Manual  NEG.IMAGE You can set the NEG IMAGE as ON or OFF, and if you set it as on, the bright area and the dark area of the image are reversed. Motion In the user-defined motion detection surveillance area, the moving object can be detected and the alarm will be triggered.
  • Page 41 HD WDR Box Camera·User Manual 4. Press OK to enter the area size configuration interface after the position is defined. 5. Move the joystick up/down/left/right to define the size of the selected area. 6. Press OK to confirm the size configuration and select RET to return to the motion menu, and select AGAIN to try again.
  • Page 42 HD WDR Box Camera·User Manual PRIVACY 1. SELECT AREA 1  2. DISPLAY MOSAIC 3. COLOR 4. TRANS.  5. DEFAULT 6. RETURN Figure 3-18 Privacy Mask Set a Privacy Mask: Steps: 1. Move the cursor to SELECT and select a privacy mask area. Eight areas are selectable.
  • Page 43 HD WDR Box Camera·User Manual The Color and TRANS [0-3] only works when the display is set to color. 3. Move the joystick up/down/left/right to define the position of the selected privacy mask area. 4. Press OK to enter the area size configuration interface after the position is defined.
  • Page 44 HD WDR Box Camera·User Manual DEFECT 1. LIVE DPC AUTO 2. STATIC DPC ON 3. RETURN Figure 3-19 Defective Pixel Correction  LIVE DPC Live DPC detects and corrects the dynamic or the real-time defective pixels occur during the using. ON, OFF or AUTO is selectable. The correction level [0-255] is configurable if the live DPC is set to ON;...
  • Page 45 HD WDR Box Camera·User Manual Steps: 1. Set the static DPC as ON, and press OK to enter the static DPC edit interface. 2. Move the cursor to START, and press OK to start correcting the defective pixels. 3. Press OK when you see the message of CLOSE THE IRIS THEN PRESS ENTER KEY showing up on the screen.

  • Page 46: Adjust

    HD WDR Box Camera·User Manual 3.3.10 ADJUST In the Adjust sub-menu, you can configure the settings, including the sharpness, the image quality on monitor, the OSD settings, the lens shadow compensation, and the video output standard, etc. Move the cursor to ADJUST and press OK to enter the adjust configuration interface.
  • Page 47 HD WDR Box Camera·User Manual ----|----+0 1. BLACK LEVEL ----|----50 2. BLUE GAIN ----|----60 3. RED GAIN 4.RETURN Figure 3-23 Monitor CRT If liquid-crystal display (LCD) is selected. You can user-define the gamma, blue gain [0~100], and red gain [0~100]. Gamma is the name of a nonlinear operation used to code and decode luminance or tristimulus values in video or still image system.

  • Page 48: Reset

    HD WDR Box Camera·User Manual Lens Shading Correction (LSC) corrects the phenomenon where the image gets darkened or blurred on the periphery. Set it ON to enable the LSC. Set it OFF to disable the LSC. 3.3.11 RESET Reset all the settings to the default. 3.3.12 EXIT Move the cursor to EXIT and press OK to exit the menu.
  • Page 49 HD WDR Box Camera·User Manual...

Table of Contents