Table of Contents
Advertisement
Steps:
1. Move the cursor to POS/SIZE, and press OK to enter the position
and size configuration interface.
2. Move the joystick up/down/right/left to define the position of the
defog area.
3. Press OK again to switch the position configuration to the size
configuration.
4. Move the joystick up/down/right/left to define the size of the
defog area.
5. Press OK and select RET to return to the defog menu or select
AGAIN to re-define the position and size.
6. (Optional) Move the cursor to DEFAULT and press OK to restore
the defog settings to the default.
Low, middle and high are selectable for the defog gradation
HD WDR Box Camera·User Manual
DEFOG
1. POS/SIZE
2. GRADATION
3. DEFAULT
4. RETURN
Figure 3-3
25
LOW
RET
Defog
Advertisement
Table of Contents
