Table of Contents
Advertisement
The Color and TRANS [0-3] only works when the display is set to
color.
3. Move the joystick up/down/left/right to define the position of the
selected privacy mask area.
4. Press OK to enter the area size configuration interface after the
position is defined. Define the size by configuring the top left, top
right, bottom left, and bottom right of the selected area.
5. Press OK to confirm the configuration and select RET to return to
the privacy mask menu, or select AGAIN to try again.
6. (Optional)Move the cursor to DEFAULT and press OK to restore
the privacy mask settings to the default.
Defect
Defective pixels are pixels in a CCD or CMOS image sensor in digital
cameras, in which the defective pixels fail to sense light levels
correctly. This series of camera supports defective pixel correction.
Move the cursor to DEFECT and press OK to enter the defective pixel
correction interface.
HD WDR Box Camera·User Manual
42
Advertisement
Table of Contents
