The gain of BLC can be set to High, Middle, and Low, the higher the
gain is, and the clearer the image is. Follow the steps below to set a
BLC area.
Steps:
1. Move the cursor AREA, and press OK to enter the area edit
interface.
2. Move the joystick up/down/left/right to define the BLC position.
3. Press OK to enter the area size edit interface.
4. Move the joystick up/down/left/right to define the BLC size.
5. Press OK to confirm the selection, and select RET to go back the
BLC menu, or select AGAIN to re-define the BLC area.
6. (Optional) Move the cursor to DEFAULT and press OK to restore
the BLC settings to the default.
HD WDR Box Camera·User Manual
↑
← POSITION→
↓
Figure 3-5
Define a BLC Area
27