Steps:
1. Set the static DPC as ON, and press OK to enter the static DPC edit
interface.
2. Move the cursor to START, and press OK to start correcting the
defective pixels.
3. Press OK when you see the message of CLOSE THE IRIS THEN
PRESS ENTER KEY showing up on the screen.
The level of the STATIC DPC ranges from 0 to 60.
Some of the defective pixels may appear undistinguished for the
system to detect. You can adjust the SENS-UP to X2, X4, X6, X8, X10,
X15, X20, X25 or X30 to brighten the defective pixel for the system to
find it. You can set the AGC level from 0 to 8.
RS485
You can set the parameters of RS485 in this menu, including camera
ID, ID display status and baud rate (2400/4800/9600/19200/38400).
HD WDR Box Camera·User Manual
RS485
1. CAM ID
2. ID DISPLAY
3. BAUDRATE
4. RETURN
Figure 3-21
44
--------|255
ON
2400
RET
RS485