HIKVISION UD.6L0201D1633A01 User Manual page 29

HSBLC
HSBLC masks strong light sources that usually flare across a scene.
This makes it possible to see the detail of the image that would
normally be hidden.
Steps:
1. Set the cursor right/left to select HSBLC and press OK to enter the
edit interface.
2. Move the cursor to SELECT and select the area by setting the
joystick to left/right. Four areas are selectable.
3. Set the DISPLAY to ON /OFF to enable/disable the HSBLC area.
4. Press OK to enter the position/size edit interface.
5. Move the joystick up/down/left/right to define the position of the
HSBLC area.
6. Press OK to switch to the size edit interface.
7. Move the joystick up/down/left/right to define the size of the
HSBLC area.
HD WDR Box Camera·User Manual
HSBLC
1. SELECT
2. DISPLAY
3. LEVEL
4. MODE
5. BLACK MASK
6. DEFAULT
7. RETURN
Figure 3-6
28
AREA 1
ON 
---|------ 40
ALL DAY
ON

RET
HSBLC