Advertisement
Quick Links
Video Conference Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual may contain several technical mistakes or
printing errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or
update the products or procedures described in the
manual.
01000020201118
Advertisement
Related Manuals for HIKVISION UD21533B-A
Summary of Contents for HIKVISION UD21533B-A
- Page 1 Video Conference Camera User Manual User Manual Thank you for purchasing our product. If there are any questions, or requests, do not hesitate to contact the dealer. This manual may contain several technical mistakes or printing errors, and the content is subject to change without notice.
- Page 2 The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
-
Page 3: Regulatory Information
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Page 4 Laws and Regulations The device should be used in compliance with local laws, electrical safety regulations, and fire prevention regulations. Electrical Safety The socket-outlet shall be installed near the equipment and shall be easily accessible. Cautions Fire Prevention No naked flame sources, such as lighted candles, should be placed on the equipment.
- Page 5 1 Introduction 1.1 Product Features The main features are as follows: High performance CMOS sensor Varifocal lens Clear imaging against strong back light due to WDR technology AGC for self-adjust brightness Support remote control Built-in microphone with clear sound ...
- Page 6 1.3 Overview 1.3.1 Appearance Figure 1-1 Appearance of Video Conference Camera Table 1-2 Description Description Description Microphone Audio In Indicator PS2 Interface IR Signal Receiving 1/4-20UNC Screw Module Hole Lashing Eye Kensington Lock Note: Red indicator means the device is standby. Blue indicator means the device is normally working.
- Page 7 One-touch Focus: It enables the device to focus automatically. One-touch Flip: It enables to rotate the image 180 ° when the device is installed upside down. Pan/Tilt Control: It enables to adjust the lens direction. Manual Focus: It enables the device to focus ...
-
Page 8: Installation
2 Installation The package contains the mount. Both table mounting, and wall mounting share the same mount. The installation methods are not compulsory. You can just put the camera on the table, if this way meets your needs. 2.1 Table Mounting Steps: 1. -
Page 9: Pendant Mounting
2.2 Wall Mounting Steps: 1. Drill three screw holes in the wall according to the holes of the mount. 2. Align the screw holes on the mount with that on the wall, and secure the mount with supplied screws. Figure 2-4 Fix the Mount in the Wall Figure 2-5 Secure the Camera with the Mount Repeat steps 3 to 5 of section 2.1 Table Mounting to finish the installation. - Page 10 Q: What should I do with image flickers? A: Slide the Backlight Compensation to 0 to disable the WDR function, and the device will restart. Switch 50Hz/60Hz frequency to check if the flickers disappear. If not, contact the professionals to solve the problem. UD21533B-A...