Table of Contents
Advertisement
Steps:
1. Move the cursor to ←or →, and press OK to decide the character
position on the dotted line.
2. Move the cursor to select the needed characters, numbers, and
symbols.
3. Press OK to confirm. The selected character will be displayed on
the dotted line below.
4. Move the cursor to POS to edit the camera title position on the
screen.
Move the cursor to POS.
1).
Press OK to enter the CAM TITLE position setting interface.
2).
Move the joystick up/down/left/right to change the position of
3).
camera title.
Press OK to exit the CAM TITLE position setting interface, and
4).
return to the CAM TITLE menu.
HD WDR Box Camera·User Manual
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ▶ → ←↑↓( )
¯ - _ ■ / = & : ~ , .
← → CLR POS END
C A M E R A 0 1 _ _ _
Figure 3-13
35
CAM Title
Advertisement
Table of Contents
