Symbol PDT 7200 series Reference Manual page 84

PDT 7200 Series Product Reference Guide for Windows
To build a script:
1. In the Script Window, select the script to be built.
2. From the Script menu, select Build.
OR
On the toolbar, choose
3. Select whether to build the partition table, or one volume.
4. Select ASCII format for your hex image, or Compression, which reduces the size of
most hex images in order to speed downloading. Click OK.
5. TCM performs a check. If the script is has no errors, TCM proceeds with the build.
If the Build Fails
If the build fails, TCM displays a message indicating which file(s) are missing.
If the total amount of flash required by the script exceeds the image size, a TCM error results
and the build fails. To correct this, reduce the number of files in the volume, or make the disk
non-bootable. Refer to
setting the image size appropriately.
6-12
. The Configure Build window appears.
Defining Script Properties
®
CE
on page 6-7 for more information on