Creating The Script For The Hex Image; Open A New Or Existing Script - Symbol PDT 7200 series Reference Manual

Creating the Script for the Hex Image

On start-up, TCM displays the screen shown on
Explorer window pointing to your system drives. The Script1 Window directory pane
displays three volumes: Volume1, Volume2, and Volume3. Depending on the type of flash
chip you have, the number of volumes may change. Files can be added to each of the volumes.
Create a new script file or open an existing script
!
Drag and drop existing files and directories to that script
!
Set the script parameters
!
Save the script
!
Review and modify the script.
!
Each process is described in the sections that follow.

Open a New or Existing Script

Scripts are created in the Script Window.
To open a new script:
Choose New from the File Menu, OR
!
Click on
!
To open an existing script (e.g., a standard script provided in the SDK):
Choose Open from the File Menu and select the script file name, OR
!
Click on
!
Double click on an existing script in the Script Browser window.
!
Note: If you open and make changes to an existing script, saving the changes
writes over the existing script. If you wish to use an original or
Symbol-supplied standard script as a base and save the changes in a
new script, use Save As instead of Save after making the changes.
from the tool bar.
from the toolbar and select the script file name, OR
Configuring the Terminal
page 5, with the Script1 window and File
6-9