Re-Initializing The Battery Pack - Symbol PDT 7200 series Reference Manual

To ensure that the terminal is fully suspended and not timed out, press the Power key
again, wait for the display to come on, then press the Power key again to fully
suspend the terminal.
2. Remove the battery.
3. Insert a fully charged battery and relatch.

Re-initializing the Battery Pack

You must re-initialize the battery pack if it is fully discharged and untouched for
approximately one week.
1. Install the battery pack in the terminal. Refer to
Battery on page 4-9.
2. Place the terminal in the cradle to re-initialize and charge the battery pack. Refer to
Charging the Terminal's Battery
Installing a New or Recharged
on page 4-5.
Cradle Setup and Operation
4-11