S24 WEP (Wired Equivalent Privacy) Configuration
Note: Refer to the Access Point Product Reference Guide for additional
steps that may be required to complete the WEP configuration.
1. Select the S24 WEP Config option to display the S24 WEP Config screen.
Figure 3-16. Spectrum24 WEP Configuration Selection screen
This screen allows you to set the parameters for WEP.
Figure 3-17. Spectrum24 WEP Configuration screen
WEP Algorithm - Select None (Clear), Low (40 bit), or High (128 bit)
!
WEP Index - Select 1, 2, 3, or 4
!
Spectrum24 Network Configuration
3-15