Symbol PDT 7200 series Reference Manual page 43

5. Press the OK button to return to the Ping Test screen.
Figure 3-12. Spectrum24 Ping Test screen
6. Select the ICMP Setting option. The ICMP Setting screen displays.
Figure 3-13. Spectrum24 ICMP Setting screen
The ICMP Setting screen allows you to set the ping IP address, ping buffer size, and
ping count to be used in an ICMP Ping test.
7. To change the data on this screen, use your left and right buttons or tap the option
on the left-hand side of the screen to scroll through the available values for the field.
Selecting the Ping Address option displays an entry screen which allows you to use
the keypad to enter the correct data. When the data on the screen is set as required,
press the Accept button. The Ping Test screen redisplays.
Spectrum24 Network Configuration
3-11