Table of Contents
Advertisement
Installing the Clearwire pc card driver
Do not insert your pc card until after you install the software
*
Before using the Clearwire pc card for the first time, you must install the software included with your card.
1
Insert the installation CD or USB drive into laptop PC.
The installation program automatically runs.
Figure 1.5 Insert the installation CD or USB drive into laptop PC
If the installation program does not automatically run:
• From the
• When the Run dialog box opens, type
• Click OK.
2
Follow the on screen instructions to complete the installation.
Plugging in the Clearwire pc card
Do not insert your pc card until after you install the software
*
1
After powering on your laptop, slide the pc card into the slot on your laptop.
2
The pc card detects the network.
You can discover the connection status of your pc card in the following ways:
• The icons displayed in your laptop's system tray vary depending on the operating state
of the pc card and the signal strength it detects.
Installing and using Clearwire pc card
2
Start
menu, select Run.
Figure 2 Plugging pc card into laptop computer
Figure 3 System tray icons: connected/signal strength icons
or
X:\Setup
where X: is your laptop PC's CD-ROM or USB drives.
Advertisement
Table of Contents
