Managing your Clearwire pc card connection
You may want to disable the pc card connection to use your WiFi network.
To enable or disable the pc card connection:
1
Right click on the System Tray Connection icon.
2
Select one of the following depending on your state:
•
Enable
-- To use the pc card to connect to the Clearwire network.
•
Disable
-- To disable the pc card connection.
Note: To enable your Wi-Fi connection manually, use the Windows control
Figure 9 Enable or Disable pc card using the System Tray icon menu
Finding signal
When your pc card is enabled, it will go out to the network to find a signal from a near by
base station antenna. You can monitor its progress from the Signal Strength window.
1
Open the Signal Strength window:
Click on the System Tray Connection icon.
2
View the status of your pc card
Signal Strength
Searching for signal
Installing and using Clearwire pc card
panel.
5