pc card user's guide

   Related Manuals for Motorola Clearwire

   Summary of Contents for Motorola Clearwire

  • Page 1

    pc card user’s guide...

  • Page 2: Table Of Contents

    Welcome Before you begin Installing the Clearwire pc card driver Plugging in the Clearwire pc card Choose between your Clearwire pc card and WiFi Managing your Clearwire pc card connection Finding signal Optimizing the signal Unplugging your Clearwire pc card...

  • Page 4: Welcome

    Internet access. You can plug the Clearwire pc card into any laptop computer with a side access cardbus slot. The Clearwire pc card contains an internal antenna that it uses to connect with base stations. Once a connection is established between the Clearwire pc card and a base station you can access the Clearwire network.

  • Page 5: Installing The Clearwire Pc Card Driver

    Do not insert your pc card until after you install the software Before using the Clearwire pc card for the first time, you must install the software included with your card. Insert the installation CD or USB drive into laptop PC.

  • Page 6: Choose Between Your Clearwire Pc Card And Wifi

    • You can see more detailed status of the Clearwire pc card by rolling your mouse over the system tray icon. The status tip box appears (Figure 4). Figure 4 Status tip box To obtain the best signal, follow the process described in the section “Optimizing the signal’...

  • Page 7

    If you select Yes, the pc card will become active and WiFi network will be disabled. Note: when you remove your Clearwire pc card, you will be asked if you want to turn on WiFi again. If you select No, the WiFi network will remain active and the pc card will not be enabled.

  • Page 8: Managing Your Clearwire Pc Card Connection

    Right click on the System Tray Connection icon. Select one of the following depending on your state: • Enable -- To use the pc card to connect to the Clearwire network. • Disable -- To disable the pc card connection.

  • Page 9: Optimizing The Signal

    To obtain a stronger connection, try to position your laptop in different work areas. If your signal is poor, you should install the Clearwire External Antenna for your pc card. See the Quick Start Guide for that antenna for more information on how to use it.

  • Page 10: Unplugging Your Clearwire Pc Card

    Unplugging your Clearwire pc card Unplug your Clearwire pc card safely by using Safely Remove Hardware system tray icon before unplugging the pc card from your computer. Double click the Safely Remove Hardware system tray icon. In the hardware devices list,...

  • Page 11: Disabling Your Clearwire Pc Card

    Note: To enable your Wi-Fi connection manually, use the Windows control panel. Uninstalling the Clearwire pc card To uninstall the Clearwire pc card, go to the Start menu and select All Programs, Clearwire, Clearwire Connection Manager, Uninstall. This removes the Connection Manager and the driver software from your laptop PC.

  • Page 12: Disclaimer

    Disclaimer Statements included in this manual indicating support provided by Motorola are subject to changes at any time. Motorola reserves the right to make changes to this manual. Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc.

  • Page 13: Regulatory Requirements

    READ THIS INFORMATION BEFORE USING YOUR MOTOROLA PCC-2510. RF Operational Characteristics Your Motorola product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.

  • Page 14: Product Operation And Eme Exposure

    Product Operation and EME Exposure Your Motorola product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): • United States Federal Communications Commission,Code of Federal Regulations;...

  • Page 15: Electro Magnetic Interference/compatibility

    If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Installing and using Clearwire pc card...

  • Page 16: Operational Cautions

    To avoid possible interference with blasting operations, turn off your PCC-2510 when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio. ” Obey all signs and instructions. Installing and using Clearwire pc card...

  • Page 17: Equipment And Installation Warranty

    Clearwire warrants to you that the Equipment and its Installation by Clearwire will be substantially free from material defects in material and workmanship, under normal use in compliance with Clearwire’s instructions, for a period of one (1) year from the date you receive the Equipment or installation (“Limited Warranty”). This Limited Warranty excludes...

  • Page 18: Patent And Software Provisions

    1 that Motorola will be notified promptly in writing by such purchaser of any notice of such claim; 2 that Motorola will have sole control of the defense of such suit and all negotiations for its settlement or compromise; 3 should the Product or its parts become, or in Motorola’s opinion be likely to become, the...

  • Page 19

    7 uninstalling 7 pc card and Wi-Fi connection in conflict 3 signal quality optimizing 6 Signal Strength window 6 status tip box 3 system tray icons pc card disconnected 7 signal strength 2 Installing and using Clearwire pc card...

  • Page 20

    For more information: Go to www.clearwire.com or please contact Customer Care Clearwire at 1 888...

Comments to this Manuals

Symbols: 0
Latest comments: