External Input; External Trigger Control; External Trigger Polarity - Honeywell Vuquest 3310g User Manual

6
External Input / Output
The Vuquest 3310 scanner can be integrated with a variety of third party devices. The External Trigger and Illumination Con-
trols can be configured using the bar codes in this chapter. These controls offer simple trigger signals. An External I/O license
and cable are required; contact the nearest technical support office for further information (see
on page 14-1).

External Input

External Trigger Control

The External Trigger Control allows object detection from the third party device to trigger the scanner. If you want to use
the third party device object detection, scan the External Trigger Control On bar code. If you want to use the 3310 scan-
ner object detection, scan the External Trigger Control Off bar code. Default = External Trigger Control Off.
* External Trigger Control Off

External Trigger Polarity

External Trigger Polarity has two states, High and Low. A digital high polarity is 1 and a digital low polarity is 0. If the third
party device triggers on low polarity, 0, scan the External Trigger Polarity Low bar code. Default = External Trigger Polar-
ity High.
* External Trigger Polarity High
Technical Assistance beginning
External Trigger Control On
External Trigger Polarity Low
6 - 1