Battery Installation And Charging - AT&T TL86109 Quick Start Manual

Battery installation and charging

Install the battery, as shown below. For best performance, keep the handset
in the charger when not in use. The battery is fully charged after 16 hours of
continuous charging.
1. Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label. Insert the supplied
battery with the label THIS SIDE UP facing up, as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
CHARGE light
3. Charge the handset by placing it face up in the
charger. The CHARGE light is on when charging.
5