AT&T TL86109 Quick Start Manual page 14

Bluetooth setup
Pair your first headset
To pair and connect a headset:
1. Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
2. Press DIR, CID, /DELETE or /REC to highlight
Bluetooth, then press the SELECT softkey
Press DIR, CID, /DELETE or /REC to highlight
3.
Add headset, then press the SELECT softkey. The
screen displays Pls set headset to discoverable
mode then press
4. Set your headset to discoverable mode.
Press the NEXT softkey to set your telephone base to
5.
discoverable mode and search for your headset.
6. Once the telephone base finds your headset, press the
SELECT softkey
. Enter the PIN of your headset (the PIN for most
Bluetooth devices is 0000), then press the NEXT softkey
8. If the PIN is correctly entered, the telephone base
displays Headset setup complete.
9. The telephone base displays Connect headset to
base? Press the YES softkey to confirm. The telephone
base displays Headset setup completed. Device
connected. The corresponding status icon (
B) displays when the headset is successfully
connected. The corresponding light on the telephone
base (DEVICE A or DEVICE B) turns on.
If you have trouble pairing your headset, it may not be
compatible with your TL86109. Check the Bluetooth
compatibility list at
NOTE: The pairing process may take up to one minute. If the pairing
process fails, try again.
−¬ v
.
.
www.telephones.att.com
.
A or
.
13
Answering sys
Directory
Cal l log
Bluetooth
SELECT
BLUETOOTH
Download dir
Add cel lular
Add headset
SELECT
Pls set headset
to discoverable
mode
then press
NEXT
FOUND DEVICES
Headset A
Headset B
Bluetooth
SELECT
.
ADD HEADSET
ENTER PIN
----
NEXT
Headset setup
complete
Connect headset
to base?
YES NO
Headset setup
completed.
Device
connected.
-