Table of Contents
Advertisement
AirCard 700 Series Installation Guide
Note: You cannot set up a
profile before installing the
software. (See
page
page 17
for notebook instal-
lation instructions or
CE device installation instruc-
tions.)
Notebook PCs
36
Setting up a profile
To determine whether you have a profile:
1.
Insert the SIM into the AirCard if it is not already inserted.
17.)(See
(See
2.
Insert the AirCard into the PC Card slot if it is not already
page 27
for
inserted. (See
page 33
Handheld PCs.)
3.
If Watcher is not running, start Watcher, by selecting
Start > Programs > Sierra Wireless > AirCard 700 Series >
Watcher for AirCard 700 Series
Select
CE devices
If Watcher detects that no profile has been set up, you are
prompted, "Would you like to configure a profile now?"
Select
If this prompt does not appear, your AirCard may have
been preconfigured. You can verify that you have a profile
by selecting
the Connections window which lists all profiles.
To create a profile
1.
On the Connections window, select the
2.
If you want to use a pre-defined profile, in the
field, select the profile from the drop-down list. Then skip
to
3.
Complete the fields in the GPRS Profile window by
entering a
profile, such as the name of your service provider) and
User Name
4.
Select whether you want to make connections automati-
cally or manually, or whether you are required to provide
a password each time you make a connection:
·
·
·
page
13.)
page
21.) (See
for Pocket PCs, or
or double-click the desktop shortcut.
Start > Programs > Watcher for AirCard 700 Series
Yes
.
Tools
Connections
>
Step
5.
Profile Name
(any meaningful description of the
Password
,
, and/or
Autoconnect
If you select
automatically whenever you insert the AirCard.
Manual
If you select
, you must select the
on the main Watcher window to make a connection.
Prompt for Password
If you select
and enter a password to make a connection. Use this
page 21
for notebook PCs,
page 34
for Tablet and
to access the GPRS tab of
Add
button.
Profile Name
APN
, if applicable.
, a connection is established
Connect
, you must select
2130204CEFCC
button
Connect
Advertisement
Table of Contents
