Table of Contents
Advertisement
AirCard 700 Series Installation Guide
Note: ActiveSync is made by
Microsoft and is included with
PCs running Windows CE. (It is
also available from the Microsoft
web site.) ActiveSync 3.5 is
supported on Windows 98, 2000,
XP, and NT 4.0 with Service
Pack 6 or later. ActiveSync 3.7 is
supported on Windows 98 SE,
2000, Me, NT, and XP.
28
Handheld PCs:
•
Windows CE 3.0 Handheld PC 2000
CE .NET devices:
•
Windows CE .NET (Windows CE 4.1 or later)
If you have a Pocket PC and do not know what version of
Windows CE you are using, select
System
About
tab, and tap the
screen identifies your version of Windows CE as follows:
•
Version 4.20.1081 (Build...)—your operating systems is
Windows CE 4.x Pocket PC 2003
•
Windows 3.0.11171 (Build...)—your operating systems is
Windows CE 3.0 Pocket PC 2002
•
Windows 3.0.9348 (Build...)—your operating systems is
Windows CE 3.0 MS Pocket PC
Your CE device must have:
•
2.6 MB of storage memory
•
A PC Card slot or, if you are using a Pocket PC, the
PCMCIA jacket accessory (If you are using a jacket with
two slots, see the important note on
ActiveSync installation requirements
If you are installing using ActiveSync, the host PC (the desktop
or notebook PC to which you install the software) must have:
•
A CD-ROM drive
•
ActiveSync version 3.5 or 3.7 installed.
Note: ActiveSync 3.5 is required if you are using:
Windows CE 3.0 MS Pocket PC, or
Windows CE 3.0 Pocket PC 2002.
ActiveSync 3.7 is required if you are using:
Windows CE 4.x Pocket PC 2003, or
Windows CE .NET.
You must also have the ability to establish a connection
between the CE device and host. This could be:
•
An infrared connection (requiring that both the CE device
and host have infrared ports).
•
A cable connection using either a USB or serial cable
(requiring the cable and that the CE device and host have
the necessary connectors)
Start > Settings
, tap the
icon. The second line on the
page
33.)
2130204CEFCC
Advertisement
Table of Contents
