Table of Contents
Advertisement
Note: If you are using a jacket
that has two slots, ensure the
second slot does not contain
another network interface card
when you use the AirCard.
Rev 2.1A Jun.04
Installation on Devices Running Windows CE
3.
Copy the CAB file to a folder on the CE device, if you do
NOT want to install from the flash card. (The CAB file will
be erased during installation.)
4.
Double-tap the CAB file to install the software.
5.
If a warning occurs, indicating that the application is not
supported for this device type, click
OK
6.
Tap
to install the software to the Program Files folder.
7.
When prompted to do a soft reset, tap
device.
·
If your device has a reset button (usually a circular
indentation on the bottom of the device, or in the case of
Handheld PCs, on the keyboard) press the stylus or pen
into the reset button.
·
If there is no reset button, you may need to run a
software utility to reset the device. (Consult the
documentation that came with your PC if you do not
know how to reset the device.)
Inserting the AirCard into a
Pocket PC
To insert the AirCard into a Pocket PC:
1.
If the PCMCIA jacket accessory is not already attached,
slide the Pocket PC bottom first into the jacket. It should
click into place.
2.
Ensure the SIM card is inserted into the AirCard
(described on
page
(described on
page
3.
With the label facing towards the front of the Pocket PC,
insert the network card into the slot at the top of the jacket,
as shown in the photo.
Figure 4-1: Inserting the AirCard into a Pocket PC
4.
Position the antenna so that it is vertical.
Yes
to proceed.
OK
and reset the
13) and the antenna is attached
15).
33
Advertisement
Table of Contents
