Table of Contents
Advertisement
AirCard 700 Series Installation Guide
Note: Users of Windows 2000
must be logged in with adminis-
trative privileges.
Note: The installer runs twice—
once to install Watcher and once
to install the Network Adapter
Manager.
Note: Do not forcefully insert the
AirCard. This may damage
connector pins. If you have more
than one PC Card slot, you may
obtain better signal strength
using the top slot.
18
Installation on Windows 98,
2000, and Me
Note: You may require your Windows CD. Ensure you have the CD
before proceeding.
1.
If the AirCard CD is not already in your CD-ROM drive,
insert it. The CD should autostart and display a menu.
·
If the CD does not autostart, select
d:\launch.exe
where
drive.
2.
From the CD start-up menu, select
documentation
and then
launch the installer.
Yes
3.
Click
to accept the terms of the license agreement and
proceed with the installation. (If you do not agree to the
No
terms, click
to cancel the installation.)
Next
Back
4.
Use the
and
installer.
Using the default settings for the Destination Location and
Program Folder is recommended unless you have special
requirements and an advanced understanding of PC con-
figuration.
5.
If you are using Windows 2000, the
Found
window may appear. Click
window appears. (The warning can be safely ignored.)
6.
When prompted to insert the AirCard, click
is not inserted, insert it. (See
attached, attach it. (See
insert the AirCard into your PC Card slot:
Figure 3-1: Inserting the AirCard
Start > Run
d
is the drive letter of your CD-ROM
notebook installation and
notebook software installation
buttons to navigate through the
Digital Signature Not
Yes
each time the
OK
page
13.) If the antenna is not
page
15.) With the label facing up,
2130204CEFCC
and enter
to
. If the SIM
Advertisement
Table of Contents
