Table of Contents
Advertisement
AirCard 700 Series Installation Guide
24
Changing the interrupt
If the message, "Communication Failed!..." occurs when you
start Watcher, a possible reason is that you have assigned an
interrupt to the AirCard that has also been assigned to another
device.
To change the interrupt assigned to the AirCard:
1.
Open the Control Panel by selecting
Control Panel
.
2.
Double click the Network icon.
Adapters
3.
Select the
tab.
Sierra Wireless AirCard GPRS Adapter
4.
Select
AirCard EDGE Adapter
5.
Use the drop-down list to change the Interrupt to another
OK
number and click
6.
Close the Network window by clicking the
7.
Restart your PC.
8.
If the AirCard still does not function properly, repeat the
procedure, selecting a different interrupt.
Setting Internet Explorer to use
the AirCard
If you are using Internet Explorer as your browser, and it is set
to connect to the Internet through a dial-up modem, you must
set it to use a LAN (local area network) card.
To set Internet Explorer version 5 or 6 to use a LAN, follow
these steps:
1.
In Internet Explorer, select
Connections
2.
Click the
Setup
3.
Click
to run the Internet Connection Wizard.
I want to set up my Internet connection
Select the option "
4.
manually, or I want to connect through a local area network
(LAN).
Next
" Click
.
I connect through a local area network (LAN)
5.
Select "
Next
.
6.
Ensure no check boxes are selected in the "Local area
network Internet configuration" window and click
No
7.
Select
when prompted to set up an Internet mail
Next
account and click
Finish
8.
Click
to exit the wizard.
Start > Settings >
or
Properties...
and click the
.
Close
Tools
Internet Options
>
tab.
.
2130204CEFCC
Sierra Wireless
button.
button.
.
". Click
Next
.
Advertisement
Table of Contents
