Removing A Sim Card - Sierra Wireless AirCard 700 Series Installation Manual

AirCard 700 Series Installation Guide
Note: To prevent the SIM from
becoming jammed in the AirCard
slot, ensure the edge of the SIM
is smooth before inserting it. Do
not attach labels to your SIM as
this may also cause it to become
jammed.
14
4. Orient the SIM card, as shown in the diagram on the
bottom side of the AirCard.
5. Insert the end of the SIM card into the slot, and gently
push it until it is fully inserted.
Figure 2-1: Inserting the SIM card Into the AirCard SIM card slot
Once the SIM card is properly inserted, it should not
extend beyond the end of the card. See
Figure 2-2: A SIM card properly inserted

Removing a SIM card

To remove the SIM card, you will need a narrow object, such as
a pen or a straightened paper clip, to push into the eject hole.
1. Place the AirCard PC Card on a smooth, hard surface such
as a tabletop, as shown in
Figure 2-3: Positioning a pen to eject the SIM card
Figure 2-2.
Figure 2-3.
2130204CEFCC