Installing The Network Card Driver - Sierra Wireless AirCard 700 Series Installation Manual

Table of Contents

Advertisement

AirCard 700 Series Installation Guide
Note: Do not forcefully insert the
AirCard. This may damage
connector pins. If you have more
than one PC Card slot, you may
obtain better signal strength
using the top slot.
Note: Depending on how
Windows NT is configured, the
prompts and windows described
here may not appear in the
precise order indicated. Use
these instructions as a guideline
to the selections you should
make.
Note: The AirCard will not
function with the default settings
for the I/O Port, Interrupt, and
Com port if any of these
resources are allocated to
another network card or other
device. If you are familiar with
the Windows NT Diagnostics
window, you can check to see if
these resources are available.
Otherwise, leave the default
settings and if the AirCard does
not function following the driver
installation, see the instructions
on changing the interrupt on
page
24.
22
Figure 3-3: Inserting the AirCard
3.
Turn on your PC.
4.
Log on as Administrator.

Installing the network card driver

1.
Open the Control Panel by selecting
Control Panel
.
2.
Double-click the Network icon to open the Network
window.
Adapters
3.
Click the
tab in the Network window.
Add...
4.
Click the
button to open the Select Network Adapter
window.
Have Disk...
5.
Click the
window.
6.
Enter the path to the drivers as follows (where
drive letter for your hard drive):
·
For the AirCard 750:
Inc\AirCard 700 Series\Drivers\WinNT
·
For the AirCard 775:
Inc\AirCard 700 Series\Drivers\WinNT-AC775
OK
Click
to open the Select OEM Option window in which
Sierra Wireless AirCard GPRS Adapter
AirCard EDGE Adapter
OK
7.
Click
. A window opens showing the settings for the
I/O Port (0x800), interrupt (10) and COM port (4).
8.
If you are aware that these resources are in use by another
device (see the note in the margin), change the settings and
OK
click
. Otherwise, click
Windows then copies the driver files.
Start > Settings >
button to open the Insert Disk
c:\Program Files\Sierra Wireless
c:\Program Files\Sierra Wireless
Sierra Wireless
or
is selected.
OK
to use the default settings.
2130204CEFCC
c
is the

Advertisement

Table of Contents
loading

Table of Contents