Printing From A Paper Document Or Book - Riso RZ 970 Series User Manual

Printing from a Paper Document or Book

The steps for scanning an original for printing is explained below.
Note:
• See "When using a Linked Printer" ( p.43) to print from a Linked Printer (sold separately) with Auto-Link function.
1
Make sure the machine is ON.
Ready to Mak Ready to Make Master
Basic
Page (A4)
Line
Multi-Up
Print
Black
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
• If the key is lit, the machine is in Energy
Saving mode. Press the
Energy Saving mode.
2
Check the Display.
• If current screen is in Mode Selection, touch
[MasterMake] to switch to the Master Making
Basic Screen.
Select an Operation Mode
RISO RZ 977
MasterMake
P r i n t i n g
e Master
Selections Functions Admin.
Contrast Size Feed Tray
Auto Auto
A4
D-Feed
Check
Idle Info
READY
key to cancel
The following screen appears.
Ready to Make Master
Basic Selections
Page (A4) Contrast
Auto
Li ne
Multi-Up D-Feed
Check
Print
Black
• Make sure either the Master Making Basic
Screen or Print Basic Screen is displayed, and
go to step 3.
Note:
• For RZ977 models, the Feed Tray can be
selected using [Feed Tray].
• When you see [Data-Map] in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
• If you see Link Basic Screen, press the
key to switch to Master Making Basic Screen.
3
Place the original.
Place the original on the Platen Glass or in the
optional ADF (Auto Document Feeder) unit.
When placing on the Platen Glass
Place the original face down on Platen Glass.
Align centre on the top edge, and close Platen
Cover.
Magazines, books, scrap books, etc. should be
placed on Platen Glass.
Printing from a Paper Document or Book
Basic Operations
Functions Admin.
Size Feed Tray
Auto
A4
Idl e Info
READY
41