Riso RZ 970 Series User Manual page 240

Message
Paper Size cannot be
Defined by Specified
Reproduction Size
Select Paper Size Manually
!! Possible Multiple
Paper Feed !!
Check Printed Copies
Processing Print Data
from PC
This Function is Not
Available while Process-
ing Current Data
Receiving Tray Paper Guides
can Not Move
Remove Paper
from Receiving Tray
! Scanning is Not Possible !
External CI is not Connected
or Processing Connection
Check Cable Connection
Select Paper Tray
and Press Start Key
Set Original
and Press Start Key
Re-scanning will be Started
to Add Image Processing
Symptom/Action
(Symptom)
No Feed Tray of a size appropriate for
the original is available in the connected
Linked Printer.
(Action)
Select a Feed Tray in the connected
Linked Printer manually.
Check printed copies.
The machine is receiving the document
data from the computer.
While the data is being transmitted, Link
Mode printing and Scan mode are
disabled.
(Symptom)
Paper remaining in the Auto-control
Stacking Tray is larger than the size
specified for printing, and the Paper
Guides cannot function properly.
(Action)
Check the Auto-control Stacking Tray
and remove paper.
(Symptom)
The scanning function is unavailable
due to a lost connection with an external
controller or because connection
processing has not finished.
(Action)
Check the connection with the external
controller.
(Symptom)
The paper size is not suitable for "2 Up".
(Action)
Load paper of appropriate size or select
the proper Feed Tray.
(Symptom)
No original is set on the machine to
rescan for image processing by the
RISO Editor.
(Action)
Set the original and scan again.
Troubleshooting
How to Clear a Pop-Up Message
• For printing from the manual Feed
Tray
Touch [Manual Feed]. (output in A3 size)
• For printing by selecting paper size
Touch [Paper Select].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
Touch [Cancel].
(Alternatively, press the
key to clear.)
• For canceling "D-Feed Check"
Touch [D-Check OFF].
Touch [Close].
Initiate the Print job after the
transmission is complete, or print from
the machine.
• When resuming the print job;
Touch [Continue].
(Alternatively, press the
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
Touch [Close].
(Alternatively, press the
key to clear.)
• For selecting the Feed Tray
Touch the button of the Feed Tray you
want to use.
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
Touch [Close].
(Alternatively, press the
key to clear.)
When a Message Displays
key or
key or the
key to print.)
key or
key or the
key or
key or the
239