Riso RZ 970 Series User Manual page 44

Note:
The following selections are available:
• Auto Process ( p.62)
• Page (Image Processing mode) ( p.52)
• Scanning Contrast ( p.54)
• Size (Enlargement/Reduction) ( p.55)
• Feed Tray ( p.59)
For RZ977 only
• Paper ( p.60)
• Programme ( p.113)
• Job Memory ( p.125)
• Dot Process ( p.63)
• Contrast Adj ( p.65)
• Tone Curve ( p.66)
• Ink Saving ( p.68)
• 2 Up/Multi-Up Print ( p.69)
• Book Shadow ( p.80)
• Top Margin ( p.82)
• Side Margin ( p.84)
• Preview ( p.86)
• D-Feed Check ( p.97)
• Interval ( p.98)
• Paper Interposal ( p.100)
For RZ977 only
• Receive Tray ( p.103)
This setting is available with the Auto-control
Stacking Tray (optional for RZ970 model).
• Eject Wing Control ( p.102)
• Special Paper Ctrl ( p.105)
• Max. Scan ( p.139)
• ADF Semi-Auto ( p.140)
This setting is available when the ADF unit
(option) is installed.
• Idling Action ( p.135)
• Renew Page ( p.136)
• Scanning Side -ADF ( p.142)
This setting is available when the Auto Docu-
ment Feeder DX-1 (option) is installed.
• Overlay ( p.180)
This setting is available when the Document
Storage Card DM-128CF (option) is attached.
• Job Separation
This setting is available when the Job Separator
(option) is installed.
Tip:
When using a Linked Printer (sold separately)
The "Auto-Link" function allows you to select the
output device according to print volume.
(Factory default is set to print 20 or more copies
from the machine, 19 or less from a Linked
Printer.)
However, when the following functions are
selected, all copies are printed from the machine.
• 2 Up
• Multi-Up Print
• Book Shadow
• Programme
• Ink Saving
• Scanning Side -ADF
(Back Side -> Simplex, Duplex -> Simplex)
Important!:
• Be sure to enter the number of copies before
pressing the
The output device will be chosen according
to the number of copies specified.
When set to 0, pressing the
the master-making process on the machine.
Note:
• The "Link-Free Volume" setting, which
affects the automatic selection of the output
device, can be modified on the Admin.
screen.
p.154
5
Confirm the Paper Receiving Tray.
Skip this step if the machine is equipped with the
Auto-control Stacking Tray (standard for RZ977
model, optional for RZ970 model). Adjust the posi-
tion of the Receiving Tray Paper Guides/Stopper
to match the paper size used.
Printing from a Paper Document or Book
Basic Operations
key.
key starts
43