Riso RZ 970 Series User Manual page 238

Message
Load Paper in Standard Feed
Tray (Feed Tray 1/ Feed Tray
2)
!! Multi-Up is Not Available
with This Paper Size !!
Replace with Proper Paper
of Standard Size
!! No Auto Paper Size
Selection with Irregular
Size Original !!
Select Paper Size
and then Restart
!! No Auto Reproduction
Size Selection with This
Combination of Original
and Printing Paper !!
Select Size Manually
!! No Auto Reproduction
with This Original
and Printing Paper !!
Select Size Manually
Symptom/Action
(Symptom)
The Feed Tray indicated has run out of
paper.
(Action)
Load paper in the Feed Tray.
p.203
(Symptom)
Multi-up functions cannot be used when
custom-sized paper is in the Feed Tray.
(Action)
Load standard size paper in the Feed
Tray.
(Cause 1)
Attempting to set an irregular-size
original in a connected Linked Printer
using "Auto".
(Action)
Select a Feed Tray for the connected
Linked Printer with the correct size
paper.
(Cause 2)
A normal-size original has been set in
the wrong position.
(Action)
Lift the Platen Cover Pad up and set the
original correctly.
(Symptom)
Auto Reproduction Size is less than
50% or more than 200%.
(Action)
Modify the reproduction size.
(Symptom)
Auto reproduction is not available
because the size of the original could
not be detected.
(Action)
Set the reproduction size manually.
Troubleshooting
How to Clear a Pop-Up Message
Touch [Close].
(Alternatively, press the
key to clear.)
Touch [Close].
(Alternatively, press the
key to clear.)
• For selecting the Feed Tray
Touch [Paper Select].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
• When changing the "Size" setting;
Touch [Size Setting].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
• When changing the "Size" setting;
Touch [Size Setting].
• When stopping the print job;
Touch [Cancel].
(Alternatively, press the
the key to clear.)
When a Message Displays
key or the
key or the
key or
key or
key or
237