Riso RZ 970 Series User Manual page 77

Functions for Master-Making
6
Touch the button of the number of
images to use.
Single-Original
2UP
Set the original
in direction shown
in the right figure
To cancel the "Multi-Up Print" settings, return to
the previous screen and touch [Cancel].
7
Touch [OK].
Single-Original
2UP
Set the original
in direction shown
in the right figure
The following screen appears.
Ready to Make Master Multi-Up
Basic Selections
Digital Copy Count
Programme
Job Memory Job Memory
Dot Process
Returns to the Functions screen. "Multi-Up Print"
setting is updated.
76
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
Cancel OK
4UP 8UP 16UP
Cancel OK
4UP 8UP 16UP
Functions Admin.
Contrast Adj
Tone Curve
Multi-Up Print
2 Up
1/4
P.
Note:
• When using "Multiple-Original" mode, in the
case that the actual number of pages in the
document is less than the number of pages
specified in the mode settings, set an equiva-
lent number of blank pages in the machine to
make up the specified number.
p.70 "Original Orientation and Print Results"
• When using the "Auto Process" setting, printing
will continue automatically when an original is
set on the ADF unit.
• When "Ink Saving" is turned ON, the Image
Processing Mode cannot be changed between
individual originals.
• To cancel a "Multi-Up Print" setting once it has
been confirmed, follow steps 3 and 4, touch
[OFF] and then [ON] on the screen.
Single-Original
2UP 4UP
Set the original
in direction shown
in the right figure
8
Make necessary settings.
Make various settings as needed.
9
Press the
Scanning of the original starts.
After scanning has finished, follow the usual steps
to print.
Cancel OK
8UP 16UP
OFF
key.