Sub Pcb; Heaters - Royal Sovereign RSC-1650C Service Manual

2. Detach the main PCB from the 4 white plastic supporters. Figure 7

3.5 Sub PCB

1. Follow the same steps as in the "Replacing the Right Cover" section.
3.6 Heaters (RSC-1650H / HR Only)
1. Take off the Left and Right Covers.
2. Using pliers (one to hold and one to loosen the nut) as shown in Figure 8,
take out the two 5/16 (8mm) nuts on each side.
3. Take out two screws and disassemble the upper heater bracket on each side. Figure 9
Figure 7
Figure 8
Figure 9
11