Elation ELAR DW BRICK Instruction Manual page 22

9.4 "TIME" – Operating Hours
These functions will detail different time functions associated with the fixture.
<LIFE> (0000~9999 Hours)
This function tracks the running time of the fixture from the point it was last cleared.
Where "XXXX "represents the total number of running hours. This time is none
destructive and will remain in the fixtures memory indefinitely. Use this time to track
rentals or show durations.
<CODE> Clear run time access code
This lock-out code prevents the current run time from being erased accidently. The
access code is "038"
<CLFE> Clear Fixture Run Time
This function resets the run time to zero.
9.5 "Edit" Internal Program Settings:
The fixture comes equipped with a built-in DMX recorder that allows custom programs to
be installed and recalled directly from the fixture's control board. Programs can be
created and stored using the fixture's control board or by using an external DMX
controller.
9.5.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in "Function Mode" under
"Program Run."
9.5.2 REC – Auto save function.
9.5.3 Edit program – This function allows the user to edit the built-in programs.
9.5.4 Edit Scenes – This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
©Elation Professional, Los Angeles Ca. 21
ELAR DW BRICK ™
www.ElationLighting.com