Elation ELAR DW BRICK Instruction Manual page 10

5. DMX Output Jack – This jack is used to send an incoming DMX signal to the next
fixture in the DMX chain via a female, 3-pin or a 5-pin XLR jack.
6. Main Power Input Lead – This lead is the main power input lead. When the unit is
the first in a chain or the only fixture to be used, be sure to use the power starter
cable that converts a standard Edison 3-prong to the IP rated twist lock connector.
When jumping from fixture to fixture be sure to only use Elation IP rated power
connectors to maintain the IP rating.
7. Power Output Jack – Use this jack to jump power to another ELAR DW BRICK™
8. MENU BUTTON
system.
9. UP BUTTON – This button is used to scroll forward when navigating through the
fixture's menu system.
10. DOWN BUTTON – This button is used to scroll backwards when navigating through
the fixture's menu system.
11. ENTER BUTTON – This button is used to select and confirm a menu function.
12. LED MENU DISPLAY – Four segment LED menu display, details all menu functions
©Elation Professional, Los Angeles Ca.
This button is used to access and exit the fixture's on-board menu
–
9
ELAR DW BRICK ™
www.ElationLighting.com