Elation ELAR DW BRICK Instruction Manual page 20

the number of steps under "Edit program". You can edit the individual scenes under
"Edit scenes". With this function, you can run the individual scenes either automatically,
i.e. with the adjusted Step-Time.
9.1.3 <DISP> - Menu Display Settings
This function allows the internal programs to run in either stand-alone or master/salve
DMX chain. In "Alone" mode
"VALU" - Display the DMX 512 value of each channel
This function will electronically display the current DMX value for any channel that is
currently being adjusted. The display will automatically detail the changing DMX
values as they are received from the controller. This function is "off" by default.
"FLIP" – This function will flip the display readout by a 180˚ allowing for better
visualization when the fixture is mounted in an inverted position.
"D ON" – The display is designed to turn off during normal operation to avoid
excessive light in situations that require an extremely dark environment. This
function will adjust the time delay the fixture will remain on before it turns off. This
function is disabled as default.
LOCK –This function allows you to lock the keys.
With this function you can activate the automatic keylock status. If this function is
activated, the keys will be automatically locked in 15 seconds from the last press. In
order to deactivate the keylock status, press the Mode/Esc-button for 3 seconds.
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed.
3. Press ENTER, the display will show "VALU".
4. Tap the UP button until "LOCK" is displayed and tap the ENTER button.
5. Press the UP button to select "ON" to activate this function, or "OFF" to
deactivate this function.
6. Press ENTER to confirm.
7. Press MENU to return to the main menu.
©Elation Professional, Los Angeles Ca. 19
ELAR DW BRICK ™
www.ElationLighting.com