Elation ELAR DW BRICK Instruction Manual page 12

Clamp Mounting
The ELAR DW BRICK™ provides a unique mounting bracket assembly that allows the unit
to stand on flat surface, hang on truss via a clamp, or be used in cluster allow multiple units
to rigged together (see the illustration below). Regardless of the mounting option you choose
please refer to the safety guidelines in this manual to avoid damage to the unit and/or injury
to persons.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an
added safety measure be sure to attach at least one properly rated safety cable to the fixture.
See illustration below.
©Elation Professional, Los Angeles Ca.
Be sure all electrical connections are performed by a qualified
electrician before attempting any operation.
CAUTION!
11
ELAR DW BRICK ™
www.ElationLighting.com