Related Manuals for Vista VPC5-704CME
Summary of Contents for Vista VPC5-704CME
- Page 1 Installation Manual Set up and user manual for the VPC5-704CME VPC5-704DNE cameras...
- Page 3 Before You Begin Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes. This manual provides installation and operation information. To use this document, you must have the following minimum qualifications: ...
- Page 4 RoHS Announcement All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and without the hazardous substances cited in the directive. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the product end-of-life.
- Page 5 IMPORTANT SAFEGUARDS 1. READ AND RETAIN INSTRUCTIONS Read the instruction manual before operating the equipment. Retain the manual for future reference. 2. CLEANING Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use harsh cleansers or aerosol cleaners. 3.
-
Page 6: Ce Compliance Statement
11. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 12. SERVICING Do not attempt to service the video monitor or equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. -
Page 7: Table Of Contents
TABLE OF CONTENTS INTRODUCTION --------------------------------------------------------------------------------------- 1 CONTENTS OF PACKAGE ------------------------------------------------------------------------- 2 OSD ADJUSTMENT ----------------------------------------------------------------------------------- 2 OSD MAIN MENU TREE ----------------------------------------------------------------------------- 3 OSD MENU SETTINGS ------------------------------------------------------------------------------ 5 SPECIFICATIONS ------------------------------------------------------------------------------------- 11 DIMENSIONS------------------------------------------------------------------------------------------- 12... -
Page 8: Introduction
INTRODUCTION Features: ● 700TVL Colour & Monochrome resolutions ● 1/3" Sony EXview HAD CCD with Effio „e‟ DSP ● 0.15Lux (Colour) @ F1.2 Sensitivity (CME version) 0.15Lux (Colour) 0.01 Lux (B/W) @ F1.2 Sensitivity (DNE version) ● Auto electronic shutter [1/50 ~ 1/10,000] and manual electronic shutter modes ●... -
Page 9: Contents Of Package
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the camera and its accessories from the carton and verify that they were not damaged in shipment. The content of the package includes: Camera Mini-DIN connector (for video-or dc-type auto-iris lens) -
Page 10: Osd Main Menu Tree
OSD MAIN MENU TREE SETUP MENU (page 1) LENS SHUTTER/AGC LENS SHUTTER/AGC WHITE BAL BACKLIGHT AUTO IRIS AUTO PICT ADJUST MANUAL MANUAL MOTION DET RETURN NEXT (page2) RETURN EXIT SAVE WHITE BALANCE BACKLIGHT PUSH USER 1 USER 2 ANTI CR MANUAL PUSH LOCK RETURN... - Page 11 SETUP MENU (page 2) PRIVACY PRIVACY DAY/NIGHT DAY/NIGHT AREA SEL AUTO CAMERA ID COLOUR COLOUR SYNC TRANSP LANGUAGE MOSAIC CAMERA RESET BACK (page 1) EXIT SAVE RETURN RETURN CAMERA ID SYNC NR MODE (titling) Y LEVEL C LEVEL RETURN RETURN RETURN RETURN LANGUAGE...
-
Page 12: Osd Menu Settings
OSD MENU SETTINGS LENS MANUAL Manual lens only AUTO TYPE (DC / VIDEO) Sets the type of mechanical iris (Video lens is not supported) MODE (OPEN / CLOSE / AUTO) Sets the type of control to be applied over the mechanical iris. SPEED (0 –... -
Page 13: White Bal
WHITE BAL ATW (Auto Trace White balance) SPEED (0~255) Adjusts the pull-in speed of ATW. DELAY CNT (0~255) Sets the time-based hysteresis of ATW. ATW FRAME (X0.5/X1/X1.5/X2) Sets the pull-in frame magnification. ENVIROMENT (indoor/outdoor) Preset for either indoor or outdoor applications of the ATW PUSH Wide range Auto White Balance mode (AWB) USER1 &... -
Page 14: Pict Adjust
PICT ADJUST MIRROR (ON/OFF) Inverts image horizontally. BRIGHTNESS (0~255) Sets the screen brightness. CONTRAST (0~255) Sets the screen contrast. SHARPNESS (0~255) Sets the screen sharpness. (0~255) Adjusts the hue. GAIN (0~255) Adjusts the gain. ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist with widely contrasting scenes of view. - Page 15 PRIVACY AREA SEL (1~4) Selects the motion detection area TOP (0~244) 0=top BOTTOM (0~244) 244=bottom LEFT (0~474) 0=left RIGHT (0~474) 474=right COLOUR (1~8) Sets the colours of the privacy zones. TRANSP (0.00/0.50/0.75/1.00) Sets the transparency of the privacy zone area if colour is selected. MOSAIC (ON/OFF) Sets the mosaic function as the privacy to ON or OFF.
- Page 16 NR (2D-DNR) This is used to remove noise from the image in low light conditions when AGC is applied. NR MODE (OFF, Y, C, Y/C) Sets the 2D NR filter mode. Y LEVEL (0-15) Sets the Y filter (Luminance) strength. C LEVEL (0-15) Sets the C filter (Chrominance) strength.
-
Page 17: Camera Reset
LANGUAGE LANGUAGE select between: English, Japanese, German, French, Russian, Portuguese & Spanish. CAMERA RESET CAMERA RESET - Returns the camera to the factory default settings. SAVE ALL SAVE ALL - Saves all the changes made in the menu. EXIT EXIT – Exits the menu and does not save changes made. -
Page 18: Specifications
SPECIFICATIONS MODEL VPC5-704CME VPC5-704DNE Resolution 700TVL (colour and monochrome) 1/3″ SONY EXview HAD CCD II Image sensor Total pixels 1028(H) x 596(V) Effective pixels 976(H) x 582(v) Scanning system 2:1 Interlace Scanning frequency PAL: 15.625KHz(H) x 50Hz(V) Sync. system Internal... -
Page 19: Dimensions
DIMENSIONS... - Page 20 MEMO...
- Page 21 Norbain Ltd, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41 5TP United Kingdom Manual version V1.1 (This manual is subject to change without notice)