Related Manuals for Vista VPC5-704DNS
Summary of Contents for Vista VPC5-704DNS
- Page 1 Installation Manual Set up and user manual for the VPC5-704DNS VPC5-700DNS cameras...
- Page 3 Before You Begin Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes. This manual provides installation and operation information. To use this document, you must have the following minimum qualifications: ...
- Page 4 RoHS Announcement All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means manufacture processes and products are strictly “lead-free” and without the hazardous substances cited in the directive. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the product end-of-life.
- Page 5 IMPORTANT SAFEGUARDS READ AND RETAIN INSTRUCTIONS Read the instruction manual before operating the equipment. Retain the manual for future reference. CLEANING Turn the unit off and unplug from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use harsh cleansers or aerosol cleaners. ATTACHMENTS Do not use attachments unless recommended by manufactured as they may affect the functionality of the unit and result in the risk of...
- Page 6 11. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 12. SERVICING Do not attempt to service the video monitor or equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
-
Page 8: Table Of Contents
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the colour camera and its accessories from the carton and verify that they were not damaged in shipment. The content of the package includes: 1. -
Page 9: Introduction
INTRODUCTION Features: 700TVL resolution 1/3" Super-HAD CCD II (960H) Wide Dynamic Range Day & Night(Auto, Manual, External, Filter delay, Change level adjust) 0.1Lux (Colour), 0.01Lux (BW), 0.0001Lux (Sens-Up B/W) @ F1.2 50IRE Auto Electronic Shutter [1/50 ~ 1/100,000] and manual electronic shutter modes [1/50 ~ 1/10,000] ... - Page 10 Digital PTZ Digital Effect (H/V reverse, 180 degree rotate, inverse, freeze) White Pixel Removal. Focus Aid Function. Colour Rolling Suppression. System Lock (4-character password) C/CS, back-focus cam for easy adjustment Auto and Manual white balance modes ...
-
Page 11: Camera Overview
CAMERA OVERVIEW SIDE VIEW TOP VIEW FRONT VIEW 1. Left Button 2. Up Button 3. Enter Button 4. Right Button 5. Down Button 6. Day / Night External I/O Motion ALARM OUT / RS-485 7. Power Indicator 8. Video Output Connector (BNC) 9. - Page 12 <Remarks> 1) Menu: This represents the present menu subject on top of screen. When Multi-Camset is being used, this represents the CAM ID and “camset” name. Common Headers: : Currently menu item is displayed. Use the up/down keys to select : Sub-menu.
-
Page 13: Camera Adjustment
CAMERA ADJUSTMENT <White Balance> 1) ATW/Wide Mode: No limits in the range of colour temperature. 2) ATW/Indoor Mode: Suitable for low colour temperature. - CRS (Colour Rolling Suppression) Mode supported. When you select the CRS function to On, the camera will carry out the following process: Checking Condition: Checks the current environment Checking Variation: Measures the colour rolling range during a... - Page 14 <Auto Exposure AE> * MIN_SHT (Minimum shutter speed) : PAL:1/50sec * MAX_SHT (Maximum shutter speed) : 1/100000sec * FLC_SHT (Flickerless shutter speed) : PAL:1/120sec 1) AE Mode - Full Auto: DC Lens or Video Lens – Fix shutter speed to MIN_SHT.
- Page 15 4) WDR (Wide Dynamic Range) WDR function cannot be used if BLC is on and is recommended to be used in Full Auto mode. - Visibility: Increases sharpness of the high brightness region. - Comb BAL (Combination Balance): Adjust the balance of high & low luminance area.
- Page 16 Select either “a, b, c or d”, the active point is displayed. Move the point with 4-arrow keys. Press [ENTER] key is to finish edit area. - Posi: Adjust area position with 4-arrow keys. <PVA - (Personal Video Analytics> The Video Analytics of the camera are designed to provide warnings of events to the system operators.
- Page 17 1) Zone Base Functions Max 10 Zone can be configured. The zones can be used for either PVA functions or Privacy masks, but cannot be used for both. - Zone: Select zone ID. - Func (Function): Zone Function On/Off (Blinking enabled area). - Shape: Select area shape.
- Page 18 stored background. In & Out Rect Detect object moving. Direction From top to enter of area, detecting direction of moving out. In & Out Rect Detect object moving. Direction From right to enter of area, detecting direction of moving out. In &...
- Page 19 2) Env.Setup (Environment setup): Configuration of each PVA functions. - MD Sense (MD Sensitivity): Adjust motion sensitivity. (HW sensitivity) - Loiter Time (min): Time for judgement of loitering objects. - Abandon/Absent Setup Sense (Sensitivity): Adjust sensitivity of abandon/absent detection. Det Time (min): Time for judgement of the absent/abandon area. Rst Time (sed): Event time.
- Page 20 4) dTracking Setup: Configurations for digital Pan/Tilt/Zoom. Priority: Tracking priority: Zone > Loitering > Abandon/Absent > Obj. Maximum 4 objects can be represented. - All Object: Tracking all detected object. - Loitering: Tracking detected loitering object. - Abandon/Absent: Tracking detected absent/abandon area. - Zone: When zone event rising, tracking the area.
- Page 21 Communication: Configuration for RS-485. Cam ID: Select the camera ID (001 - 255). Baud Rate: Select serial communication speed Protocol: RS-485 protocol. (Auto, VISTA 485/FASTRAX/PELCO-D/PELCO-P) Event Out: Off, Text-Out, FxLink Event Strings: Select & edit sending strings for PVA/PVA+ Events.
- Page 22 - WPC (White Pixel Compensation): Compensation for defected pixel on CCD. While operating on WPC, Iris will be closed automatically if you using DC/IRIS Lens. For manual lens, you have to cover the lens. Static/Auto: Auto detecting for defected pixel & compensation. Proceeding: Shown on screen while white pixels are being detected.
- Page 23 - Focus Aid Min SHT (sec): Adjust minimum shutter speed. Zoom: Zoom to focus window. Adj: Adjust. Start: Start measurement of maximum focus value. Stop: Stop the measurement. In addition, initialize maximum focus value. FAD Max: Hold maximum focus value. FAD Val: Shows present focus value, this changes as the lens is focused, try to get the value as close to FAD max as possible.
- Page 24 DN mode is Night. If the port voltage is low, DN mode is Day. - Burst: Select burst signal on/off at night mode. - Delay (sec): Select Delay time in D/N mode changing. - D/N Threshold: Configuration for threshold level in D/N mode changing.(Low/Mid/High/User) User Mode : Difference of D>N Level and N>D Level must be more than 2,...
- Page 25 7) Counter: Configurations for output of counting machine. : Represent counting value / adjust offset value. - Alarm On Zero: When counter value reached zero, will be alarmed. Preset Cnt1, Cnt2: When counter reached zero, counter value will be reset this value. Reset: Initialize counter.
-
Page 26: Control And Connections / Day&Night I/O Terminals
CONTROL AND CONNECTIONS OF TERMINALS D&N D&N ALARM 485+ 485- used used (RX) (TX) 1) Out put 1 and 2 are not used 2) DAY&NIGHT I/O Terminals To select Day/Night mode using external equipment, by connecting control lines to the appropriate terminals. ●... - Page 27 3) ALARM OUT (6pin) - TTL level Motion detection signals are output through this port. Active state is configurable. 4) POWER INPUT TERMINAL ● This terminal accepts a DC12V or AC24V power source from a DC12V or AC24V ac +/-10% 60/50Hz +/- 1Hz. CLASS 2 ●...
-
Page 28: Lens
LENS The lens is not supplied with this camera. Purchase a lens suitable for your requirements. These cameras accept both C-and CS-mount type lens. <Notes > *) For using main functions, it is recommended to use Auto Iris Lens with DC type. If the lens is marked with fingerprints other marks, the image quality might be poor. - Page 29 Camera ID: Off / On / Adjustable Location Language English Camera ID 001 to 255 Camera Control Tact Switch, RS485 Protocol Auto, VISTA-485, Pelco P & D ENVIRONMENTAL Operating Temp. -10℃ to +50℃ Operating Humidity 20 to 80% RH ELECTRICAL Input Voltage 12VDC -10 to +15% / 24VAC ±...
- Page 31 Manual version V1.0 (2012-05-08) This manual is subject to change without notice...