Owner's Manual Permobil F3 Corpus
Setting the end positions
The end positions are set by moving one or two screws between three differ-
ent positions underneath the armrest. Fold the armrests up to get easier ac-
cess to the screws.
1. Remove the screws underneath the arm rest. See figure below.
2. Mount the screws in desired positions. See figure below.
Figure 27. The endpoints are set by moving one or two screws between three
different positions underneath the arm rest.
Settings
A
Factory setting
B
Factory setting
C
Custom setting
D
Custom setting
Locked
0° to +15°
-15° to +15°
0° to +30°
Settings and adjustments
59