Permobil F3 Corpus Owner's Manual page 105

Owner's Manual Permobil F3 Corpus
Storing Memory
Before storing a seating position in memory, position the seating system in
the position that is desired to be stored.
1. Enter the memory mode by pressing and holding the memory button (8)
for two seconds, see fig. While in the memory mode, the LED flashes
green.
2. Press and hold button (4) until the LED immediately to the left of the
Memory LED lights green. You have now "enabled" storing and are ready
to store a memory seat position.
3. Press and hold the desired "store" button (5, 6 or 7) for three seconds to
memorize the current seat position in a memory location, see fig. The
LED above the memory position will light red and the control panel will
emit a tone when the memory has been successfully stored.
4. Return to standard seat function operating mode by pressing the memory
button (8), see fig.
ICS Control Panel
Figure 93. Memory function
105