Manual Release Of The Magnetic Wheel Locks - Permobil M300 Owner's Manual

Owner´s Manual Permobil M300

Manual Release of the Magnetic Wheel Locks

The wheelchair is fitted with a manual
brake release on each drivewheel that
can be released to make it possible
to move the wheelchair manually. The
brake release levers are located at the
front of the wheelchair.
Release the wheel locks
1. Shut off the wheelchair using the
start button on the control panel.
2. Move the levers outwards to release
the brakes. The chair can now be
moved manually.
Engage the wheel locks
Move the lever inwards so that it
assumes in its innermost position.
Always check that the release levera
goes right to its most inner position.
m WARNING!
Do not engage or disengage the wheel locks
unless power to the chair is off.
In order to avoid the wheelchair rolling away,
ensure that the wheelchair is on a level and dry
surface before releasing the wheel locks.
Be aware that the chair will not have brakes
when the wheel locks are in the free-wheel
position.
Make sure that the person pushing the chair
has full control when the wheel locks are dis-
engaged.
Always reset the wheel lock release after
manually moving the wheelchair.
m CAUTION!
When the wheel locks are released, the chair
will not drive. If it does, contact an Authorized
Permobil service center as soon as possible.
Location of the release levers.
Wheel lock released.
Wheel lock engaged.
81
Handling