To Store The Flat Tire Or Spare Tire, Jack, Bar And Wheel Nut Wrench - Mitsubishi LANCER Owner's Manual

11. Check the tire inflation pressure. The recommended tire
pressure for your vehicle is listed on the tire and loading
information placard attached to the driver's door sill as
shown in the illustration.
Refer to "Tire inflation pressures" on page 7-32.
CAUTION
!
Driving with an improperly inflated tire can cause
an accident. If you have no choice but to drive with
an under-inflated tire, keep your speed down and
avoid sudden steering or braking, if possible. Inflate
the tire to the correct pressure as soon as possible.
Refer to "Tire inflation pressures" on page 7-32.
After changing the tire and driving the vehicle about
620 miles (1,000 km), retighten the wheel nuts to
make sure that they have not come loose.
If the steering wheel vibrates when driving after
changing the tire, have the tire checked for balance
at your nearest authorized Mitsubishi Motors dealer
or a repair facility of your choice.
Do not mix one type of tire with another or use a dif-
ferent size from the one listed. This would cause
early wear and poor handling.
To store the flat tire or spare tire, jack, bar and
wheel nut wrench
Reverse the removing procedure when storing the flat tire or
spare tire, jack, bar and wheel nut wrench.
Refer to "To remove the compact spare tire" on page 6-11 and
"Tools and jack" on page 6-7.
For emergencies
6
N00850000120
6-19