Mitsubishi LANCER Owner's Manual page 282

5. Press and hold the multi-information meter switch (for
about 2 seconds or more) to change the setting to the
selected language.
NOTE
If the battery is disconnected, the memory of the language
setting is erased and is automatically set to ENGLISH.
If "---" is selected in the language setting, a warning mes-
sage is not displayed when there is a warning display or
interrupt display.
Changing the language on Mitsubishi Multi-Communi-
cation System or the Hands-free Bluetooth
match the multi-information display
The language used in the Mitsubishi Multi-Communication
System (if so equipped) or the Hands-free Bluetooth
phone interface system with voice recognition (if so equipped)
can be changed automatically to the same language as that
shown in the multi-information display.
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to change from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
2. Lightly press the multi-information meter switch to select
Type 1
®
system to
(if so equipped)
Type 2
N00529800099
®
cellular
3. Every time the multi-information meter switch is pressed
" " (language cooperative control).
for a long time, the setting will change as follows: A (lan-
guage cooperation: enabled) → M (language cooperation:
disabled) → A (language cooperation: enabled). The set-
ting is changed to the selected condition.
Features and controls
3
3-191