Operation Sound Setting - Mitsubishi LANCER Owner's Manual

Features and controls
NOTE
If the battery is disconnected, the memory of the language
cooperative control is erased and is automatically set to
"A" (language cooperation: enabled).
The language display modified with the language setting
can be switched in the following manner.
• When "A" (language cooperation: enabled) has been
selected with the language cooperative control, the lan-
guage for the Mitsubishi Multi-Communication System
(if so equipped) or the Hands-free Bluetooth
phone interface system with voice recognition (if so
equipped) is automatically changed to the language
selected for the multi-information display.
3
• When "M" (language cooperation: disabled) has been
selected with the language cooperative control, the lan-
guage for the Mitsubishi Multi-Communication System
(if so equipped) or the Hands-free Bluetooth
phone interface system with voice recognition (if so
equipped) is not automatically changed to the language
selected for the multi-information display.
3-192

Operation sound setting

You can turn off the operation sounds of the multi-information
meter switch and rheostat meter illumination button.
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-184.
2. Lightly press the multi-information meter switch to select
®
cellular
" " (operation sound setting).
Type 1
®
cellular
Type 2
N00557400058