Download  Print this page

Inspection And Repairs; Electrical Safety; Mains Plug Replacement - Black & Decker JE500 Manual

Hide thumbs

Advertisement

Table of Contents
ENGLISH
After use
• Remove the plug from the socket before
leaving the appliance unattended and
before changing, cleaning or inspecting
any parts of the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.

Inspection and repairs

• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may a ect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Do not use the appliance if the rotary
sieve is damaged.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt
to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
4

Electrical safety

Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This appliance is double insulated
in accordance with
IEC 60335-2-14; therefore no earth
wire is required
• To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.
• Check that the supply voltage shown on
the rating plate of the appliance matches
that of your electrical system. Any
connection error will invalidate the
guarantee.

Mains plug replacement

If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
terminal of the new plug.
• Connect the blue lead to the neutral
terminal.
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal.
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal.
• Follow the fitting instructions supplied
with good quality plugs.
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product.

Advertisement

Table of Contents
loading

  Related Manuals for Black & Decker JE500