Exmark Ultra Vac Lazer Z HP Series Operator's Manual page 13

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
3.3.4 Pull the idler release handle and remove the belt from the upper groove of the
3.3.5 Unlatch the front end of the blower. Pivot the blower back and lift it off the deck.
3.3.6 Install the discharge chute using the chute pivot pin (Item 18) and hairpin (Item 19)
POTENTIAL HAZARD
♦ The deck sheave will become very hot
WHAT CAN HAPPEN
♦ Touching a hot deck sheave can cause
severe burns.
HOW TO AVOID THE HAZARD
♦ Allow the deck sheave to cool completely
before removing the belt.
deck sheave.
(See Figure 4).
19
www.mymowerparts.com
FIGURE 3
CAUTION
18
FIGURE 4
8