Frequently Asked Questions - Canon iPF720 User Manual

Troubleshooting

Frequently Asked Questions

Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the
hyperlinks in the answer column.
Question
How do I print on a roll?
How do I print manually?
How do I switch between
printing on a roll and
printing manually?
How do I change the
paper type or size?
How do I cut the roll paper
after printing?
How do I print without
borders?
How do I print an A4
original enlarged on A2
paper?
How do I print without
wasting paper?
Downloaded from ManualsPrinter.com Manuals
When printing on rolls, after loading the roll, specify the paper type and length,
both on the Control Panel and in the printer driver.
ÞLoading and Printing on Rolls (→P.82)
When printing manually, specify the paper type and size in the printer driver,
and then load the paper.
ÞLoading and Printing on Sheets (→P.86)
Press the Feeder Selection button to switch the paper source between the
roll and a sheet.
ÞSelecting the Paper Source (→P.104)
Specify the type and size of paper, both on the Control Panel and in the printer
driver.
•
Specifying it in the Printer Driver
ÞSpecifying Paper in the Printer Driver (→P.191)
•
Specifying it on the Control Panel
Selecting the paper type
ÞSelecting the Paper Type (Roll) (→P.105)
ÞSelecting the Paper Type (Sheet) (→P.132)
Selecting the Paper Size
ÞSpecifying the Paper Length (Roll) (→P.106)
You can wait until ink dries before cutting the roll, and you can cut rolls at a
desired position.
ÞSpecifying the Cutting Method for Rolls (→P.122)
Borderless printing is possible on rolls. You can also specify borderless printing
in the printer driver by adjusting the original size to match the paper size.
Borderless printing is not supported on sheets.
ÞBorderless Printing on Paper of Equivalent Size (→P.232)
ÞBorderless Printing by Resizing Originals to Fit the Roll Width (→P.239)
ÞBorderless Printing at Actual Size (→P.225)
In the printer driver, you can adjust the original image to match the paper size or
width, or you can specify enlargement or reduction before printing as desired.
ÞResizing Originals to Match the Paper Size (→P.196)
ÞResizing Originals to Fit the Roll Width (→P.202)
ÞResizing Originals by Entering a Scaling Value (→P.208)
To conserve paper, you can specify in the printer driver to rotate originals 90
degrees or to print without top and bottom margins.
ÞConserving Roll Paper by Rotating Originals 90 Degrees (→P.299)
ÞConserving Roll Paper by Printing Originals Without Top and Bottom Margins
(→P.305)
Frequently Asked Questions
Answer
Troubleshooting 547