The Length Of Printed Images Is Inaccurate; Documents Are Printed Crooked; Documents Are Printed In Monochrome; Lines Are Misaligned - Canon iPF720 User Manual

The length of printed images is inaccurate

In the printer menu, Band Joint is specied in Feed
Priority.

Documents are printed crooked

Skew Skew Check Lv. has been set to Loose or Off. Choose Standard in Skew Check Lv..
Width Detection has been set to Off.

Documents are printed in monochrome

In the Advanced Settings of the printer driver,
Monochrome, Monochrome (BK ink), or
Monochrome Bitmap is specied in Color Mode.
The Printhead nozzles are clogged.
Line thickness is not uniform (Windows)
In the Special Settings dialog box of the Windows
printer driver, Fast Graphic Process is selected.

Lines are misaligned

The Printhead alignment is not adjusted.
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Cause
Cause
Cause
Problems with the printing quality
Corrective Action
To ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length. You can adjust the feed amount in 0.02%
increments.
(→P.50)
Corrective Action
Choose On in Width Detection.
Corrective Action
In the Advanced Settings of the printer driver,
specify Color in Color Mode and try printing again.
Print a test pattern to check the color ink nozzles and
see if they are clogged.
(→P.516)
Corrective Action
Open the printer driver's Properties dialog box from
Print in the application software's File menu, and try
printing following the steps below.
1.
Remove the check from Open Preview When
Print Job Starts in the Main sheet.
2.
Remove the check from Page Layout in the
Layout sheet.
3.
Click the Special Settings button in the Layout
sheet to open the Special Settings dialog
box, and remove the check from Fast Graphic
Process.
Corrective Action
Adjust the Printhead alignment.
(→P.491)
(→P.493)
(→P.495)
Troubleshooting 563